Dear Friendzzz, due to frequently asked questions in the forum, I have decide to open this thread detailing the procedures of flashing using Pheonix for Symbian^3 phones...

[Login or [Only Registered and Activated users can see Content.

Click Here To Register..

]
to remove this advertisement]

If I have missed any steps or anything, please feel free to suggest me and I will add the same in my steps here...

Notes:

a. Flash at your own risk, uploader bears no responsibility for any problem(s) occurring to your device due to flashing...
b. Uninstalling is only possible after the first Restart of phone!
c. The internal file manager does not show the system folder (have deliberately left out)
d. Windows XP 32 Bit is the best OS for flashing with Pheonix
e. Its better to turn off antivirus while flashing
f. Press *#0000# to see your Product Code
g. In photos, RM-596 FW is taken as an example, u can take any Symbiandevice and fw
h. and make sure you are not downgrading i.e flashing the lower version than the current device version
i. make sure you are not flashing an edited rofs2 or rofs3....

Basic requirements:

i.) Download NaviFirm from here and Pheonix from here (Pheonix is 2010 version, for me it is the best version as till now I didn't face any problem with this one)...

ii.) Open NaviFirm which u downloaded from the above link, select your device + product code [see note f] and download the following 9 files (while downloading, focus on the extensions, which I have mentioned in bold letters below and keep an extra backup of these Original Files):


1. 0x0-0xxxx0_Pxxxx_00x.xml (Type Label Configuration)
2. 0xxxx0vx.pcx (Type Label Picture)
3. RM-xxx_014.002_14.0x_xxx_x_79.92_prd.rofs2.fpsx
4. RM-xxx_014.002_79.92_prd.core.fpsx
5. RM-xxx_014.002_Cxx.xx_xxx_1_xxx_79.92_prd.rofs3.fpsx
6. RM-xxx_014.002_Uxx.xx_79.92_prd.uda.fpsx (Content)
7. RM-xxx_0xxxxxx_014.002_00x.dcp
8. RM-xxx_0xxxxxx_014.002_00x.vpl
9. RM-xxx_0xxxxxx_014.002_00x_signature.bin

Sometimes it may not show you the 9 files which is mentioned above and may show only 6 files... In this case try to switch between the Nokia Care and Product External, as sometimes one of these source will have full files... See an example below for understanding:

[Only Registered and Activated users can see Content.

Click Here To Register..

]








iii.) Turn off your Antivirus, install the Pheonix which u have downloaded from the above link and restart ur system...

Now u r ready for flashing, follow the brief steps below CAREFULLY to avoid frustration and problems...

Brief steps of flashing to solve the crc checksum error:



1. Rename the provided uda file to your uda file name 'RM-xxx_014.002_U0x.0x_xx.xx_prd.uda.fpsx'
2. Copy paste the original 9 firmware files which u have downloaded through NaviFirm to C:/Program Files/Nokia/Phoenix/Products/RM-xxx/
3. Connect ur device (C7/N8/E7/xx) through Ovi Suite and wait if any drivers’ installation is in progress
4. When driver installation in done and it shows that drivers are up-to-date, then execute Phoenix (better right click and run as administrator)




5. Go to Manage Connection > USBx - RM-xxx


6. Go to File > Scan Product > and wait until the bottom bar of the phoenix says ready and will display your phone's connection





7. Go to Flashing > Firmware Update > Choose your product code (05xxxxx)







8. Press Refurbish button!


9. There will be a warning about the file is not complete / missing bla..bla..bla.. (this step is important)



10. This is very important!!! Don’t press anything in Pheonix yet and go to the provided hacked uda!
11. Copy paste the provided CFW / hacked UDA file (that has been renamed) to C:/Program Files/Nokia/Phoenix/Products/RM-xxx/ and overwrite it
12. Now come back to Phoenix and press ‘YES’...






13. Wait for sometimes until flashing process completes... And then, u r Done!!!



Any suggestions for improvements are always welcome... Cheers!!!

HellBeast Reviewed by HellBeast on 22nd August 2011. Brief Flashing / Hacking Guide for Symbain^3 phones using Phoenix by HellBeast Dear Friendzzz, due to frequently asked questions in the forum, I have decide to open this thread detailing the procedures of flashing using Pheonix for Symbian^3 phones... If I have missed any steps or anything, please feel free to suggest me and I will add the same in my steps here... Notes: a. Flash at your own risk, uploader bears no responsibility for any problem(s) occurring to your device due to flashing... b. Uninstalling is only possible after the first Restart of phone! c. Rating: 5

[Only Registered and Activated users can see Content.

Click Here To Register..

]


But bro if u download the content files for the flashing it will not show that error...

bro this shows when we don't download that huge 1gb file because this file is for e drive.

Originally Posted by HellBeast [Only Registered and Activated users can see Content.

Click Here To Register..

]

bro this shows when we don't download that huge 1gb file because this file is for e drive.

Actually bro those files are not Memory card..!!!!
I checked it out and tat file is just the phone's content files..!!
Different phones have different sizes according to their version and most of the old mobile have very small content files...!!!!
Just telling this piece of info bro..!!!!

bro its for internal memory drive not phone memory but internal memory like 16gb for n8 and 8gb for c7 its that file. see the screenshot again i am flashing since many months bro. i know this is a memory card file only this includes like video trailers, wallpapers etc etc.

Once a download done from Navi Firm+ or any other software u need to put them in a specific location

x32 bit Operating System: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-625

x64 bit Operating System: C:\Program Files\Nokia\Phoenix\Products\RM-625