[Flashing Guide] How to Flash CFW to your Device

[~RAM~]

[Flashing Guide] How to Flash CFW to your Device

[Login or [Only Registered and Activated users can see Content.

Click Here To Register..

]
to remove this advertisement]

This Guide will explain how to flash your Device with Custom Firmware using JAF

First of all SALUTE to all those who made this sort of stuff possible..!!!

Disclaimer:
Do all the flashing at your own risk, you may damage your phone if done wrongly!

This Guide has been created using Nokia 5800, but can be followed to flash any firmware for any device. (doesn't mean you can flash E72 fw in X6..etc)

Now back to Topic


First you have to download your firmware files using navifirm then copy all files to:
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-***\"

RM-*** must be renamed to your RM version



Then you have to download the hacked or customized firmware files you want to flash into your device...

Rename those downloaded files to the one your actual firmware files are of.. e.g. if your genuine file name is abc.fpsx and asdf.V03 and the hacked or customized firmware files have name aaa.fpsx and bbb.V22 then rename those files to abc.fpsx and asdf.V03

Copy those renamed files to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-***\"
and overwrite.

Download & launch JAF v.1.98.62.exe

Set options like in picture below:
that is
uncheck all boxes on bb5 tab except "manual flash", "dead usb"


then check "use ini" and wait for pop up box to show up...
And select your phone:
if your device is not listed, simply follow the steps mentioned at the end of the thread



JAF will load files copied to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-***\" (on picture is RM-504 but it have to be RM-***)

*** corresponds to your RM version

JAF will looks like


Now TURN OFF your phone !! and then click FLASH button after that press power button (don't hold it) on your phone and JAF will start flashing.

Now wait for flash to finish and boot up your device, if it doesn't then, turn your device on yourself.. and follow all the steps (if any) mentioned in respective firmware thread to be followed after flash..




Default [Flashing Guide] How to Flash CFW to your Device
This Guide will explain how to flash your Device with Custom Firmware using JAF

First of all SALUTE to all those who made this sort of stuff possible..!!!

Disclaimer:
Do all the flashing at your own risk, you may damage your phone if done wrongly!

This Guide has been created using Nokia 5800, but can be followed to flash any firmware for any device. (doesn't mean you can flash E72 fw in X6..etc)

Now back to Topic


First you have to download your firmware files using navifirm then copy all files to:
"C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-***\"

RM-*** must be renamed to your RM version






Then you have to download the hacked or customized firmware files you want to flash into your device...

Rename those downloaded files to the one your actual firmware files are of.. e.g. if your genuine file name is abc.fpsx and asdf.V03 and the hacked or customized firmware files have name aaa.fpsx and bbb.V22 then rename those files to abc.fpsx and asdf.V03

Copy those renamed files to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-***\"
and overwrite.

Download & launch JAF v.1.98.62.exe

Set options like in picture below:
that is
uncheck all boxes on bb5 tab except "manual flash", "dead usb"
(Tick - Manual Flash, Dead USB, Normal mode) (Untick - 'CRT 308')




then check "use ini" and wait for pop up box to show up...
And select your phone:
if your device is not listed, simply follow the steps mentioned at the end of the thread




JAF will load files copied to "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-***\" (on picture is RM-504 but it have to be RM-***)

*** corresponds to your RM version

JAF will looks like



Now TURN OFF your phone !! and then click FLASH button after that press power button (don't hold it) on your phone and JAF will start flashing.

Now wait for flash to finish and boot up your device, if it doesn't then, turn your device on yourself.. and follow all the steps (if any) mentioned in respective firmware thread to be followed after flash..


Download JAF

http://uploaded.to/file/lbjq5j
http://rapidshare.com/files/186146404/JAF.1.98.62.rar

If your device is not Listed
Download "ini" file

1. unrar the file "ini.rar"
2. open the folder "ini'
3. right click on the folder "ODEON"
4. scroll down and left click "copy"
5. Now go to "C:\Program Files".
6. right click anywhere in the "C:\Program Files" folder
7. scroll down to "paste" and left click on "paste".
8. select "YES" overwrite all files if it asks you to do that

~RAM~ Reviewed by ~RAM~ on 1st July 2011. [Flashing Guide] How to Flash CFW to your Device How to Flash CFW to your Device This Guide will explain how to flash your Device with Custom Firmware using JAF First of all SALUTE to all those who made this sort of stuff possible..!!! Disclaimer: Rating: 5

[~RAM~]

Requirements or points to be considered for flashing the phone



Microsoft .NET Framework 3.5 (its must to open Navifirm)

Get it here:

[Only Registered and Activated users can see Content.
Click Here To Register..]

Navifirm (to grab original firmware from Nokia server)

J.A.F. (to flash)

PKey Emmulator(to open J.A.F. without box)

Get all above tools from here:

[Only Registered and Activated users can see Content.
Click Here To Register..]

Here are all steps:

1. Click *#0000# & check your RM
eg.My cell is 5800 XM & its RM-356

Then open navifirm & grab firmware according to your RM & location eg.India White & blue.




2. Download above tools & do as mention in its readme files.

3. Place firmware that you grabbed to
Code:

C:\Program Files\Nokia\phoenix\products\RM-XXX\

(RM-XXX means your RM. If your RM is RM-356, Then make the folder as 'RM-356')

4. Download the CFW

5. A CFW usually contain 3 or 2 files (Rofs2 + Rofs3 + UDA)

6. If the filenames do not match then rename the names of the CFW files to your original f/w files

7. Backup your original firmware files

8. Then replace your original files with the CFW files in "C:\Program Files\Nokia\phoenix\products\RM-XXX\"

9. Run PKEY Emulator & click GO.The rest of the step is given on top of the post


[Only Registered and Activated users can see Content.

Click Here To Register..

]

[aman_guru]

is there any method restore previous old firmware

[R@me$h]

There is a old Trick Choose a Product code which has ur old firmware version , change ur product code to that via NSS
And update with Nokia Updater

Gud Luck

[aman_guru]

thanks but could u send me the detailed method

[mintasinghgr8]

my nokia c5-03
while flashing with jaf

JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.36.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-697\

Searching for default location of ini...
Checking path: \Products\RM-697\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-697\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-697\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-697\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-697\RM-697_12.0.023_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-697\RM-697_12.0.023_prd.rofs2.V21
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-697\RM-697_12.0.023_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-697\RM697_12.0.000_009_U002.uda.fpsx
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Error reading phone init data...