How To Upgrade Firmware Offline Or Flash Dead Phones Using Phoenix Or JAF Service Suite

**Mobile_Guru** · 27th February 2011, 01:18 PM

How To Upgrade Firmware Offline Or Flash Dead Phones Using Phoenix Or JAF Service Suite

[Login or [Only Registered and Activated users can see Content.

]
to remove this advertisement]

Using JAF See Post 2

This tutorial can b used to flashing of dead phones.

BTW, this works for XP n Vista, x86 or x 64!!!

Tools Required:
1.Phoenix Service 2010 suite:

Code:

http://www.mobilesforums.com/showthread.php?t=4727&p=4935#post4935

2.Navifirm:

Code:

http://www.mobilesforums.com/showthread.php?t=2064

Before Flashing:

- backup your phone number and phone number of important personal information. If you want a clean installation, format your E: drive as well using the built in Nokia file manager .

Lets Start…….

->Run Phoenix Service Software installer.

>Start Installing Phoenix

-> Now (the boring part) run Navifirm (it takes an hour or more to download the whole patch)…

Note: the reason i don’t use the builtin image downloader because it downloads older versions, from my experience.

After the files downloaded, copy them to C:\Program Files\Nokia\Phoenix\Products\RM-XXX\
XXX - use your product code

->Now Run Phoenix 2009

[if you have dead phone use Dead Phones Flash? To being able to tick dead phone flash delete the usb connection in phoenix. then make it go into "no connection". then open the rm-xxx. the dead usb flashing will now be enabled.]

->Turn on the phone (it will start in offline mode because there is no SIM card inside).
->Plug in the USB cable to both the phone and the computer.
->When prompted, select “PC Suite” from the menu list on the phone.
->Wait for *all* drivers to fully install themselves before proceeding. You will see the driver icon disappear when it is complete.

-> Now Choose File Then Manage Connection

->###### “New”

->###### USB, and then ###### Next

->It will then search your USB ports for the phone. When it finds it, hit Finish

->Once it has finished scanning, ###### apply, then ###### close.

->Next, select “Scan Product” from the File menu.

-> Once finished scanning, you can see your model of phone and other details at the bottom screen.

->From the Flashing menu, choose Firmware Update.

->Wait for Phoenix to continue talking to the phone. You will see some information scroll by in the firmware Update window.
->###### Browse

->See the product code section.U should find ur product code in that column.If u see “ur” product code,well and good.

-> but if u dont see ur code,or dont see anything for that matters,press on the “…” in the given prCode section.
You should see RMxxx-blabla, select that. Variant version =00. I will select “Refurbish” so that it will restore it to factory set (Clean and default C.

->Press Start

Ignore the warning and click YES

The flashing process takes about five minutes to complete. The first few steps ensure connectivity to the phone.
After it verifies connectivity,Phoenix will automatically restart the phone.

Once it has completed (a dialog box will popup saying it has completed successfully), you may close Phoenix,
unplug the USB cable, and restart your phone. It should startup with the firmware you flashed to it.

CRC Checksum Error Solution For Phoenix When Flashing CFW

Code:

http://www.mobilesforums.com/showthread.php?t=4728&p=4936#post4936

For make it more clear here is a video thanks to chandarakk:

Mobile_Guru Reviewed by Mobile_Guru on 27th February 2011. How To Upgrade Firmware Offline Or Flash Dead Phones Using Phoenix Or JAF Service Suite How To Upgrade Firmware Offline Or Flash Dead Phones Using Phoenix Or JAF Service Suite Using JAF See Post 2 This tutorial can b used to flashing of dead phones. BTW, this works for XP n Vista, x86 or x 64!!! Tools Required: Rating: 5

**Mobile_Guru** · 27th February 2011, 01:27 PM

some people having dead phone for using PHOENIX And that happens because the ADL server checks the CRC after the firmware upgrade, which won't match because you cooked your firmware files and will cause the boot-loader not to change back to normal operating mode. So DO NOT USE PHOENIX when upgrading CORE, ROFS2, ROFS3 cooked files, use JAF only...

INSTALLING AND SETTING UP JAF

1. Download this file
[Only Registered and Activated users can see Content.
Click Here To Register..
]

[Thats Include All File You Need]
2. UNRAR the file to your desktop
3. open the folder
4. install JAFSetup_1.98.62.exe
5. install JAF to the default location

Note on you only have to do "this" if you are using Vista, Windows 2003/2008 server. or Windows 7

Code:

A. Right click on "OGM_JAF_PKEY_Emulator_v 5.exe" B. scroll down to "Properties", left click on "Properties" C. Left click the "Compatibility" at the top of the popup window. D. "CHECK" run this program in "Compatibility" mode E. In the select box. select "Windows XP" or Windows XP SP? F. left click "APPLY", then left click "OK"

GETTING YOUR FIRMWARE DOWNLOAD AND READY FOR FLASHING

1. go to "C:\Program Files\Nokia".
2. create a folder called "Phoenix" > C:\Program Files\Nokia\Phoenix
3. open C:\Program Files\Nokia\Phoenix
4. create a folder called "Products" > C:\Program Files\Nokia\Phoenix\Products
5. open C:\Program Files\Nokia\Phoenix\Products
6. create a folder with phones ROM VERSION > RM-xxx, C:\Program Files\Nokia\Phoenix\Products\RM-xxx
7. open C:\Program Files\Nokia\Phoenix\Products\RM-xxx, leave it open. xxx - your Rm version
8. go here [Only Registered and Activated users can see Content.
Click Here To Register..
]

10 download your firmware using "navifirm.exe"

11. save your firmware to > C:\Program Files\Nokia\Phoenix\Products\RM-xxx

Note...

RM-xxx will be different depending on your country or region (IE, RM-505, RM-555, etc...)

USING JAF TO INSTALL COOKED ROMS

12)Install Nokia pc suite if you dont have it installed already (Cable Drivers Are installed with them and needed)

1. from main "jaf" folder.
3.click on "OGM_JAF_PKEY_Emulator_v 5.exe" then Click Go

4. JAF gets loaded
6. in JAF left click the BB5 tab
7. under "Flash Settings"...

A. uncheck "CRT 308"
B. check "Manual Flash" "Dead USB"
C. check "Normal Mode"
D. check "Use INI"

8. Wait for INI popup window to open.
[Then a list will appear containing all phone models like the picture below]

9. scroll down to your USB FIRMWARE CABLE TYPE
10. Select firmware type (RM-???)

If JAF doesn't find the RM-xxx, just add the following two lines to the end of the file jaf_nok4models.ini (normally found in C:\Program Files\ODEON\JAF\):

Code:

[RM-xxx]Description=Nokia X6 CABLE [RM-XXX Write your RM version in xxx , write your phone model replacing nokia x6]

Note RM-??? will be your country or region type

11. left click "OK"
12. your FIRMWARE FILES ARE SETUP AND LOADED READY FOR FLASHING BY JAF
13. Turn Off Your Phone connect it to your pc.
14. in the "Operations Box", left click on "FLASH"
[Then Click YES when a dialog appears like on the picture below]

15. then Jaf will ask for turn on your phone click turn on [Now Just press the Power Button on your phone a little (just for about 1 second)]
15. Wait for JAF to start flashing
16. after flash complete your phone will auto start

It's that simple, you won't ever brick your phone if you do this way.

JAF install pack, everything you need download from here

Code:

http://uploaded.to/file/fxjr5y

Flash Log Thanks TheOne:

Code:

JAF version 1.98.62 Detected PKEY: 90009699 Card life counter: 99.99% P-key nokia module version 01.02 FBUS INTERFACE NOT CONNECTED!!! USB Cable Driver version: 7.1.29.0 Changing mode...Done! FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Searching for JAF saved location of ini... Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\ Searching for default location of ini... Checking path: \Products\RM-559\ Searching for JAF saved location of ini... Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\ Scanning ini files... Searching for default location of ini... Checking path: \Products\RM-559\ Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\ FILES SET FOR FLASHING: MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00 PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V19 CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... PRESS POWER ON NOW! Searching for phone...Found Error reading phone init data... Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... PRESS POWER ON NOW! {if you are using dead phone usb mod} Searching for phone...Found Sending RAW loader... Using 009.012.005 Elf2flash 09.11.000 CMT RAW loader... Patching RAW boot step1... Patching RAW boot step2... Patching RAW boot step3... Sending RAW Loader... ....................Loader Sent! Stage 2 starting................PUBKEYS already sent... PUBKEYS already sent... PUBKEYS already sent... PUBKEYS already sent... ..........Phone prepared OK! Waiting for the phone to boot... Searching for phone... Status byte: 8000 Selecting CMT flash... Result: 0000 Phone is in flash mode... CMT blocks: 586, APE blocks: 0 Erasing cmt... Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00... Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000 Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000 Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000 Erasing cmt zone 00D60000 - 0B71FFFF ... Erase result: 0000 Partition result: 0014 Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V19... Erasing cmt zone 07920000 - 0A2FFFFF ... Erase result: 0000 Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx... Erasing cmt zone 0A300000 - 0B71FFFF ... Erase result: 0000 Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx... Erasing cmt zone 0B720000 - 1EF7FFFF ... Erase result: 0000 Send CMT CFG... Writing cmt... Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00... Sending CMT HASH for ADA Sending CMT HASH for KEYS Sending CMT HASH for PRIMAPP Sending CMT HASH for RAP3NAND Sending CMT HASH for PASUBTOC cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... cmt->PAPUB keys already sent... Sending CMT HASH for SOS*UPDAPP Sending CMT HASH for SOS*DSP0 Sending CMT HASH for SOS*ISASW Sending CMT HASH for SOS+CORE Sending CMT HASH for SOS+ROFS1 Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V19... Sending CMT HASH for SOS+ROFS2 Write result 27: 1701 Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx... Sending CMT HASH for SOS+ROFS3 Write result 27: 1701 Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx... Rebooting... Finishing CMT session... Restarting CMT... Pooling phone... MCUSW: V ICPR72_10w04.5 22-03-10 RM-559 (c) Nokia APESW: V 20.0.005 VariantSW: V 20.0.005 Prodcode: 0589421 Done!

Some video to make it more clear :

Flash Dead Phones Using JAF Service Suite Video Tutorial

Download JAF 1.98.62:
[Only Registered and Activated users can see Content.
Click Here To Register..
]

Download JAF 1.98.62 with PKEY Emulator v5
[Only Registered and Activated users can see Content.
Click Here To Register..
]

Firmware Flashing via JAF Service Suite

Dead Phone Flashing Recovery via JAF Service Suite

**zerny** · 29th June 2011, 09:52 AM

Hi,

how to downgrade nokia 5800 XM from v52.0.101 to v52.0.007 ?
actually my phone now is dead when i try myself to downgrade it using your tutorial.
And i already tried using dead phone recovery tutorial and no solution.
please help me..
thank you..

**R@me$h** · 29th June 2011, 01:39 PM

Why

I was running on firmware 40.0.05 and after the recent 50.0.05 update was released, I rushed in and installed it as most forums reported it as a whole new firmware with loads of new features. Yeah, in fact it was a good firmware, with a new music player, a new browser interface and Kinetic Scrolling in the menu.

Although the firmware was packed with new features, it was a complete failure to me. There were several bugs, and some of them were too hard to ignore. A list of bugs can be found over at the Nokia support forum discussions. The phone’s interface was quite slow and it was so noticeable as the previous one was fast and split-second responsive. Above everything, the most annoying part was with GPS and the Music Player, which are two most crucial features I need in my 5800.

With

To do this you need the following
1. JAF Flasher Unit (Box)
2. MX Key Dongle
3. Nokia 5800 FBUS Cable
4. Internet
5. MX Key Software (MobileEx Professional)

How

Install MX key software, update it if necessary. Open it and connect using Potato Flasher interface. The whole process will be done by communicating with the phone using a FBUS cable and JAF / MX key hardware with the MX software interface.

Before trying out anything, the so called issue with downgrading firmware is that the 308 and 120 Fields of the PM is read only. Therefore downgrading a phone results in a bricked or a Watch dog timer activated phone. To avoid this mess you need to SX4 authorization to update these fields. That is why you need the MX key.

First make a backup of your phone in following order using MX key software interface and FBUS.
Full RPL backup
Full PM backup
SIMLOCK Backup (Just to be on the safe side)
BB5 Ask files (Again, just a precaution)

Once the backups are made, place the files in a secure place. If you lose em, you kiss your phone goodbye. I already did once when MX key was not so popular, and I was unaware of such downgrade bricking issues.

Connect the Phone in FBUS mode and Full erase the phone using a BB5 ERASE file or MX software’s erase option. I used the software’s native erase option as it reads the memory addresses manually and does a pretty good job wiping it off. Once it is done and confirmed, pace the V40 firmware files in a folder and open it in the flasher interface.

Since it’s a manual flasher interface, you need to provide the files in the following order. Double click each item to open and add the firmware file.

MCU – Core File (Usually around 100+ MB)
PPM – ROFS2.V01 file (Usually around 24MB – 30MB)
CNT – ROFS3 file (usually around 1MB – 10MB)

If the APE variant is required, open UDA.fpsx file in APE v Option.

Flash the firmware and let the phone reboot.

The phone might power up , or it might just go into local mode automatically. Once it connects, do a BUS check or SCAN and go to the advanced options. Select Restore SD and the MX key will write the RPL file which contains your SIMLOCK and IMEI data. Once it is done the phone will reboot and during the bus check it will say security test failed. Now go to the PM function and write the PM file (all fields). During the operation, the software will prompt you to skip 1field and 320 field of the phone, and SKIP them without selecting overwrite. The phone will reboot once again and it will show as all security tests are passed. Remove FBUS and reboot. You’re back on V40.

NO it didn’t !

*Make sure you erased the existing memory area before flashing the older firmware.

*If the simlock data is corrupt, or the phone restarts in 3 minutes (Watch Dog timer) write the RPL back using Restore SD option.

*If the security test keeps failing. Write the PM fields using super dongle auth. If it still doesn’t work, google for RM-356 PM files.

*If the HWC test check keeps failing write an RPL that is made from a RM-356 without IMEI data. Google will find you a one from a popular forum.

*Make sure you obtained firmware from a reliable source such as Navifirm.

*************DO ALL AT YOUR OWN RISK,JUST FOR SHARING ONLY**************

**zerny** · 29th June 2011, 01:53 PM

It's look so tough to downgrade the FW..
i didn't have any tools that you told me..
i'm sorry..

**NimisH_MacK** · 16th February 2012, 05:38 PM

Ramesh Bro Suppose Im Having v51 and I want v50
So If I Just Rename Rofs Which Is Rom Data And Flashh ?
I Have Done This I Have Just Downgraded Rofs Sucessfuly And Works Perfect

BUT WHAT IS IN CORE .C00 FILE ??
What Does It Inclueds ?

**R@me$h** · 17th February 2012, 10:01 PM

Originally Posted by NimisH_MacK [Only Registered and Activated users can see Content.

Click Here To Register..

]

Ramesh Bro Suppose Im Having v51 and I want v50
So If I Just Rename Rofs Which Is Rom Data And Flashh ?
I Have Done This I Have Just Downgraded Rofs Sucessfuly And Works Perfect

BUT WHAT IS IN CORE .C00 FILE ??
What Does It Inclueds ?

They are some Image Files too if size is more than 100mb that is CORE File which contains all new .DLL and .EXE files of new version

If any file .C00 and other with lesser size that contains Location of files and other information

U can edit core file with Nokia Cooker Software

**NimisH_MacK** · 18th February 2012, 12:53 AM

Ohh I Got It Now
Binh24 Ports Means Gives The Location Of The Files and We Jus Cook The Rofs Files Instead Of Editing Core.....
In Short It Is Shortcut To Start Rom Data
Thank You Rames Bro For The INFO.....

**Spankwire_28** · 14th June 2012, 08:14 AM

Thanks for sharing,

How To Upgrade Firmware Offline Or Flash Dead Phones Using Phoenix Or JAF Service Suite

Thread Tools

Search Thread

Display

How To Upgrade Firmware Offline Or Flash Dead Phones Using Phoenix Or JAF Service Suite

Advertisements

How To Flash Dead Phones Using JAF Service Suite

Downgrade Nokia 5800 XpressMusic V50

Thread Information

Users Browsing this Thread

Similar Threads

Dead BB5 phones flash with USB JAF SUCCESSFUL!!!

Phoenix Service Software 2011 v24.002.46258

Phoenix Service Software 2011.14.003.45843

Phoenix Service Software 2011.14.003.45843

Phoenix Service Software 2010.8.4.41526

Tags for this Thread

Posting Permissions

faster indexing

newlyxfkx

Rangers vs A's:

Another acecomb farmacia prezzo...

sykvmt While many of the Ukrainian...